Quick Answer: What Size Bolt Takes A 15mm Wrench?

What size is a #6 bolt?

In all cases, the larger the number, the larger the size.

Consequently a #8 screw is larger than a #4 screw, just as a 3 inch bolt is larger than a 2 inch bolt….Table 1.Threads per InchPitch (inches)Pitch (mm)80.12503.17570.14293.62960.16674.2335.50.18184.61821 more rows.

What are standard bolt threads?

The Unified Thread Standard (UTS) defines a standard thread form and series—along with allowances, tolerances, and designations—for screw threads commonly used in the United States and Canada. It is the main standard for bolts, nuts, and a wide variety of other threaded fasteners used in these countries.

What size bolt is m8?

Tap sizeBasic major dia (mm)Basic major dia (inch)M6 x 16mm.2362M8 x 1.258mm.3150M8 x 18mm.3150M10 x 1.510mm.393724 more rows

What width is m6 bolt?

6mmM6 threads are 6mm in diameter, only . 4 mm larger than 12-24 screws.

Is a 3/8 socket the same as a 10mm?

The equivalent imperial size of a 10mm socket is a 3/8 socket.

What size socket fits a 10mm bolt?

3/8th of an inch is the closest SAE wrench size to 10mm.

What size nut fits a 3/16 bolt?

US Nut Size TableSizeDiameter*HeightHex NutJam Nut5/16″1/2″3/16″3/8″9/16″7/32″7/16″11/16″1/4″17 more rows

What size head is an m6 bolt?

Engineering Metric Hardware Design DataNom. Size Thread PitchBody Diameter DHead Diameter AM6 × 16.009.74M8 × 1.258.0012.70M10 × 1.510.0015.67M12 × 1.7512.0017.6315 more rows

What is the torque for a 10mm bolt?

Classic 10.9 Bolts (Metric Coarse)Bolt Diameter x PitchThread Stress Area mm 2*When μ = 0.10 Results in:Tightening Torque NmM8 x 1.2536.631.8M10 x 1.558.063M12 x 1.7584.310813 more rows

What size bolt does a 14mm wrench fit?

Stay and get 5% OFF your purchase in the next hour!…Standard / Metric Wrench Conversion Chart.Bolt DiameterStandardMetric3/16″3/8″10mm1/4″7/16″11mm5/16″1/2″13mm3/8″9/16″14mm39 more rows

How do I know what size nut I need for a bolt?

To measure the diameter of screws and bolts, you measure the distance from the outer thread on one side to the outer thread on the other side. This is called the major diameter and will usually be the proper size of the bolt.

What are standard bolt sizes?

Typically, machine bolt sizes range from 1/4″ to 1 1/4″ for square heads and 3/8″ to 1 3/4″ in diameter for hex heads, and lengths span from about 3/4″ to 18″ for square and 6 1/2″ to 24″ for hex heads. Measure length from under the head to the threaded end of the bolt.

What is the most common bolt size?

Common Sizes For someone on a tight budget, the 10, 13 and 15mm are considered a good buy, as so many cars use them. However, the 17 and 18mm do pop up on others. Many people would buy a set because the bolts you need are always the one you don’t get, and if you buy piecemeal, you pay more overall.

What size bolt uses 1/2 wrench?

US Bolt Head/Wrench SizeBolt DiameterHead and Wrench SizeHex Bolt – Lag Bolt – Square BoltHeavy Hex Bolt1/2″3/4″7/8″9/16″13/16″-5/8″15/16″1-1/16″13 more rows

Are 3/8 and 10mm the same?

10mm = just over 3/8 inch. 11mm = almost 7/16 inch.

What size bolt fits a 15mm socket?

Size ChartBolt sizeSizeTolerance15mm15.055/16″BSW15.297/16″UNF5/8″15.9216mm16.0537 more rows

What size bolt has a 16mm head?

Metric Shoulder Bolt DimensionsShoulder Diameter (A)Thread (C)Allen Wrench Size10mm8mm x 1.255mm12mm10mm x 1.56mm16mm12mm x 1.758mm20mm16mm x 2.010mm3 more rows

What does M stand for in bolt sizes?

The “M” designation for metric screws indicates the nominal outer diameter of the screw thread, in millimetres (e.g., an M6 screw has a nominal outer diameter of 6 millimetres).

How do wrench sizes work?

Multiply the first number which is the bolt size in inches or millimeters, by 1.5 using a pocket calculator, if necessary. For example, for the numbers in Step 1, 1/2 x 1.5 = . 75 or 3/4, which is the wrench size needed for this standard-sized bolt.